NRI Currenza C2, Technical Documentation Manual

Page: 38 / 90

38
c
2
Confi guration C
ASH ACCEPTANCE
Preventing coins from getting stuck in the tubes
If a security stock is confi gured for the individual change tubes, the changer
does not pay out a minimum number of tube coins.
For coins that cause problems during stacking and tend to stand
upright instead of lying fl at, a relatively high setting for the security
stock should be selected since the coins will no longer spring back
and stand upright when they fall onto a higher stack of coins.
In case there is no setting (entry "00"), the security stock is set to 3
automatically.
MDB changers can also be set so that the confi gured security stock can
be paid out by the vending machine and the security stock can also be
transmitted to the vending machine whenever the machine scans the tube
fi lling level.
Confi guring security stock for each tube
To confi gure the security stock (1–9 coins):
Quick approach:
= Main menu > E = Settings > Coin settings > Security stock
Press key ... How often? Effect
1
1 x You enter the main menu
2
1 x You enter the S
ETTING
menu
3
until
Coin settings
You want to enter submenu C
OIN
SETTINGS
4
1 x You enter the submenu
5
until
Security stock
You want to enter submenu S
ECURITY
STOCK
6
1 x You enter the submenu
7
/
until tube desired
You want to set a security stock for this
tube
8
1 x
Now you can set a security stock for
this tube
9
/
until required digit You highlight the digit to be set
10
/
until required value This value is to be set
11
Please repeat steps 9 and 10 to set the other digit of the security stock, if necessary
12
1 x
You lock the set security stock in
memory
13
Please repeat steps 7 to 12 to the security stocks of the other tubes, if necessary
14
1 x/2 x
You return to main menu/operating
mode