NRGence eco PDU PE series User Manual Download Page 4

Page: 4 / 91

eco PDU PE Series User Manual

Package Contents

The eco PDU PE Series package consists of:

1 PE7216 / PE7324 or PE8121kJ / PE8216 / PE8324 or PE9216 / PE9324 or
PE7328 / PE9330 Power Distribution Unit

1 Power Cord (16-port and 21-port models only)

1 Mounting Kit

1 CD-ROM

1 User Instructions

Check to make sure that all of the components are present and in good order.
If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the switch or to any other
devices on the eco PDU installation.

Features may have been added to the eco PDU since this manual was
published. Please visit our website to download the most up-to-date version.

Manual Date: 2013-05-15

All other brand names and trademarks are the registered property of their respective owners.

Summary of Contents for eco PDU PE series




























































































Search results

Summary of Contents for eco PDU PE series

Reviews:

Brands by name

Popular brands

NRGence eco PDU PE series, User Manual

Search results

Summary of Contents for eco PDU PE series

Reviews:

Brands by name

Popular brands