NRD USA
/ 2937 Alt Boulevard / PO Box 310 / Grand Island, NY 14072-0310
PHONE
716 773 7634 /
FAX
716 773 7744 /
WEB
www.nrdllc.com
NRD Asia Pte. Ltd
/ 114 Lavender Street #08‐90 CT Hub 2 Singapore 338729
PHONE
+65 6679 1707 /
WEB
www.nrdllc.com
- 3 -
INST6220_05/18
1-2. Descriptions
1.
AC Power Terminal – 110~240V AC power connects from process tool when possible.
2.
ON/OFF Switch - Power ON/OFF Switch.
3.
Fan Speed Control – Select from low, medium, and high fan speed.
4.
FMS (Facility Monitoring System) - FMS will allow you to monitor the status of ionizers and alarm connection.
5.
Bracket – Refer to section 8 for dimensions.
6.
Fan Speed Indication LED – 1 LED: Low speed, 2 LEDs: Medium speed, 3 LEDs High speed.
7.
IR Receiver – for optional Remote Control.
8.
LED Indicator for Operation and Alarm.
9.
Fan Filter Grill.
10.
Fan Filter Grill Hook.
11.
Fan Operation Sensor Hole.
2. Installation
2-1. Locate the Staticmaster
®
:
12” (300mm) to 48” (1200mm) from the target to be neutralized for optimal performance, making sure that
the airflow will not be restricted.
A working electrical outlet within reach of the 6’ (1800mm) long detachable cord that is supplied with the
Staticmaster
®
.
2-2.
The Staticmaster
®
should be installed directly above the target area to be neutralized.
2-3.
Power Connection
Connect the power cord to the AC power terminal on the end of the Staticmaster
®
.
Plug the power cord into a 120 VAC, 60 Hz electrical outlet.
2-4.
Turn the Staticmaster
®
“ON”.
2-5.
Adjust the Staticmaster
®
fan speed to achieve the desired airflow on the work area.
1
3
2
4
5
6
7
8
9
11
10
