RC Car Operation Instructions
The remote control uses two 1.5V (AA)
non-rechargeable batteries. Please
install the batteries correctly according
to the polarity instructions. (Battery is
not included)
Battery socket to body power socket
USB Charging
Cable
Charging
Cable Socket
Battery
Socket
Input: 5V
Output: 7.2V
1. To protect the performance of the battery pack, do not charge the battery pack
immediately after use. Leave the battery pack for a few minutes before recharging.
2. The USB charger indicator is on during charging, and the indicator is dimmed after
charging. The charging time is about 2-3 hours.
3. It is normal for the battery pack to generate slight heat during charging.
1. Turn on the remote control car switch
2. Operate the remote control's arrow keys to control the
direction of the car
3. Turn off the remote control car switch after use
4. One-click deformation. When the deformation key is pressed,
the car will automatically deform
5. If the remote control car does not receive a command
for one minute, it will enter the semi-sleep state
(the semi-sleep state is not equal to shutdown, only the
power consumption is reduced), and the lights and sounds
are turned off. After entering the semi-sleep state, you
can wake up by any operation of the remote control.
6. If the remote control is not connected to the remote control car for one minute,
it will automatically enter the sleep state. You can wake up with any button.
Note: The battery has low voltage protection. It will automatically power off when the
voltage is low, and it can be activated after charging.
(Note: Only one side is
transformed!)
Battery Installation Instructions
Charging Instructions
