11.
To recharge with the DC-to-DC charging cord:
1.Ensure that no DC or USB equipment is connected to the jumpstarter and
that all switches and buttons on the jumpstarter are set to the OFF position.
2.Plug one end of the DC-to-DC charging cord into the 12 V outlet located on
the front of the jumpstarter.
3. Plug the other end of the DC-to-DC charging cord into the 12 V accessory
outlet of a running vehicle.
4. The Charging indicator will illuminate.
5. When charging is complete, the charged indicator will illuminate.
6. Unplug the charging cord from the vehicle first, then from the jumpstarter.
7. 12V DC OUTLET
8. TROUBLESHOOTING
It is for optional 12V power accessories with cigarette plug. Use the portable
power outlet for power supply, fishing and camping trips, extended running
for mobile phones, camcorders, computers and so on by combining your unit
with an inverter provides 110V AC power.
NOTE:
There is no 12V cigarette plug attached for this unit!
Problem
Cause
Solution
The jumpstarter
can not jump start
vehicle
The battery in the
jumpstarter is not fully
charged
Charge it for at 28 hours
The jumpstarter’s battery
has been damaged
Replace jumpstarter’s
battery
Accessories connected to
12V DC socket
The jumpstarter
does not recharge
Disconnect accessories
110V AC charger damaged
Replace 110V AC
charger
