NPower 4572002, Owner'S Manual, Page: 7 / 15

1. AC Outlets — They allow you to plug in 110V AC products with a total
continuous of 2000W or less.
2. Digital Readout —it indicates the power and DC voltages. The allowed
power tolerance is 15% (with loads of over 200W), and the allowed voltage
tolerance is +/-0.2V (no load).
3. Button Power Switch — Connect the inverter to the DC power and press
down the button power switch, the AC power is available.
4. Port for Remote Control — Connect the remote control switch and press
down the switch, the remote control function acts.(remote control switch is not
included.)
5. USB Port — Offer 5V power to USB equipment.
6. Red LED Indicator — Indicates that the consumption of the loads is under
1000 W, and the digigal display showing output power loads in watts.
7. Yellow LED Indicator — When the power exceeds 1000W, the yellow LED
indicator lights, and the digigal display showing output power loads in kilowatts.
8. Green LED Indicator — Indicates the digital display is showing DC input
voltage.
Figure 2
6.