8000 Series User’s Manual, Release 1.3
Fig. 4.1: Connected Ethernet cable
Login Web-based Management
In order to login and configure the switch via an Ethernet connection, the PC must have an IP address in the
same subnet as the switch. For example, if the switch has an IP address of
192.168.1.1
, the PC should have
an IP address of
192.168.1.z
(where z is a number between 2 ~ 254), and a subnet mask of
255.255.255.0
.
You can open the web browser and enter
192.168.1.1
(the factory-default IP address) in the address bar.
Then press <Enter>.
Fig. 4.2: Enter the IP address 192.168.1.1 in the web browser
14
Chapter 4. Getting Started
Summary of Contents for N1-8016
