FMC32 Hardware User's Manual
YA7174-0E
- 9 -
Excitation OFF
Current down ON
Excitation ON
Current down OFF
6-4 Current adjustment
Procedure of Current Adjustment is as follows.
Connect CN1 to DC+24V, CN2 to a bipolar stepper motor, a digital volt meter between CP2 and CPG, and CN4 to
PUSB-3503. Connect PUSB-3503 to USB port of PC. First of all, turn the VR1 to the maximum on the scale in the
CCW direction and then make the motor current value minimum.
After +24V is powered ON, start the operation software
(FMC32_Vxxx.exe) and create the necessary projects (or read an
existing project), and open the window of "Design the data of
pattern".
Select the "Adjustment mode" in the "Setting" menu of this window.
In this situation, adjust the current to the necessary value according to the above table (Motor current value -
Setting voltage table) while monitoring the digital volt meter value and turning the VR1.
Note 1. Do not set the current value more than the maximum value (0.5A). It could cause damage.
After adjustment, click the "Current down switching button" to turn current down function ON.
With that, current adjustment is completed.
Exit the operation software and remove the digital voltage meter after t24V OFF.
COM
DCV
+2.35V
Digital volt meter
DC+24V
Ｍ
Motor
VR1 for current
adjustment
Motor current (A)
CP3-CPG(V)
0.1 0.47
0.2 0.94
0.3 1.41
0.4 1.88
0.5 2.35(MAX)
Setting value(V)
=Motor current value x 4.7
[
Motor current value
- Setting voltage table
]
Bipolar
Stepper
Motor
PUSB-3503
PC
Adjustment mode
Click the "Current down switching
button" to turn current down
function OFF and click the
"excitation ON" button.
The "Current down switching" button appears on this window.
