background image

© 2020 Genesis Attachments, LLC

Genesis GSD Grapple

10

Safely Operate Equipment

Do not operate equipment until you are trained by a qualified operator in its use and capabilities.

See your carrier’s manual for these instructions.

 

3

Operate only from the operator’s seat. Check the seat belt daily and replace if frayed or 

damaged.

 

3

Do not operate this or any other equipment under the influence of drugs or alcohol. If you 

are taking prescription medication or over-the-counter drugs ask your medical provider 

whether you can safely operate equipment.

 

3

Never leave equipment unattended with the engine running or with the attachment in a 

raised position. Apply the brakes before exiting the equipment.

 

3

Do not exceed the lifting capacity of your carrier.

 

3

Avoid conditions that can lead to tipping. The carrier can tip when operated on hills, ridges, 

banks and slopes. Avoid operating across a slope which could cause the carrier to overturn.

 

3

Reduce speed when driving over rough terrain, on a slope, or when 

turning to avoid overturning the carrier.

 

3

Never use the attachment as a work platform or personnel carrier.

 

3

Keep all step plates, grab bars, pedals and controls free of dirt, grease, 

debris and oil.

 

3

Never allow anyone to be around the equipment when it is operating.

 

3

Do not operate poorly maintained or otherwise faulty equipment. Inform the proper authority 

and DO NOT resume operation until the problem has been fixed.

 

3

Do not alter or remove any safety features.

 

3

Know your work site safety rules as well as traffic rules and flow. When 

in doubt on any safety issue, contact your supervisor or safety coordi-

nator for an explanation.

 

3

A heavy load can cause equipment instability. Use extreme care during travel. Slow down 

on turns and watch out for bumps. The equipment may need additional counter-weights to 

counterbalance the weight of the attachment.

OPERATIONAL SAFETY

Summary of Contents for Genesis GSD 10






























Reviews: