![background image](http://html1.mh-extra.com/html/npi/dpa-2fl/dpa-2fl_operating-instructions-manual_1713844004.webp)
DPA-2FL User Manual
___________________________________________________________________________
___________________________________________________________________________
version 1.1
page 4
2. EPMS-07 Modular Plug-In System
2.1.
Components of the EPMS-07 Housing
The following items are shipped with the EPMS-07 housing:
EPMS-07 cabinet
Power cord
Fuse 2 A / 1 A, slow
Front covers
2.2.
General System Description / Operation
The npi – EPMS-07 is a modular system for processing of bioelectrical signals in
electrophysiology (see Figure 1). The system is housed in a 19” rackmount cabinet (3U)
containing a power supply and has room for up to 7 plug-in units. The plug-in units are
connected to power by a bus at the rear panel.
The plug-in units must be kept in position by four screws (M 2,5 x 10). The screws are
important not only for mechanical stability but also for proper electrical connection to the
system housing. Free area must be protected with covers.
In order to avoid induction of electromagnetic noise the power supply unit, the power-switch
and the fuse are located at the rear of the housing.
Figure 1: Example of a measurement system located in an EPMS housing with two channel
iontophoresis and balance module (MVCS-02, MVCC-02), bridge amplifier
module (BRAMP-01R) and an extracellular amplifier module (EXT-01C)