AUDIS-01D/16 User Manual
_______________________________________________________________________________________________________________
___________________________________________________________________________
version 1.5
page 5
OUTPUT signal will be at 1 V, i.e. only signals greater than 1 V will be converted into a
sound (NOISE).
(6) VOLUME potentiometer
Potentiometer for setting the VOLUME of the internal speaker or HEAD PHONES linked to
connector #3. Turning clockwise will turn up the sound.
(7) INPUT MODE switch
Switch for selecting the INPUT MODE.
PITCH:
The voltage of the INPUT signal is converted into a tone with a frequency
equivalent to the amplitude of the INPUT voltage.
OFF:
The audio monitor is switched OFF.
NOISE:
The voltage of the INPUT signal is high pass filtered, amplified and
transduced to a sound.
2 V, 1 V, 0.5 V: The audio monitor works in NOISE MODE with THRESHOLD function.
100% THRESHOLD is set to the selected value (2 V, 1 V or 0.5 V) (see
also #4).
2.2.
Description of the Rear Panel
Figure 2: AUDIS-01D/16 rear panel view
(1) INPUT BNC connectors (only in 16-channel version)
16 BNC connectors for 16 input signals. The signal to be monitored acoustically is selected by
CHANNEL select switch at the front panel.
(2) SIGNAL INPUT connector (only in 16-channel version)
D-Sub connector for connecting 16 input signals e.g. from the EXT-16DX amplifier
(3) POWER ON switch
Switch to power up the system.
(4) POWER SUPPLY connector
An external AC power supply (15 V…18 V AC, 1 A min) is connected here.
