Introduction
Cable Installation
- Before the installation and use, please read carefully the relevant content in
"Notice
for Maintenance and Safety".
1.Take the LCD TV from the wrapping package and put it in a drafty and LCD
place.
Notice:
When you plug or unpluy the LCD TV,computer or other equipments, you must
make
sure that the AC power has been already shut down; when unplugging
the power
cable or signal cable, please hold the plug(the insulated part), do
not draw the body
of the cable.
2.The RF output terminal can be connected with the RF input port of the TV.
3.The output AV terminal of DVD can be connected with the AV input port of
the TV
through AV cable.
4.Connect one end of the VGA cable with the VGA port on computer, connect
the other
end of the VGA cable with the VGA port on the TV, and tighten the
bolts clockwise on
the each end of VGA cable.
Notice:
While connecting the 15-pin VGA, please do not insert the plug overexertedly,
for
fear the pin might be broken.
5.Connect one end of the HDMI cable with HDMI output port, connect the other
end of
the HDMI cable with the HDMI port on the TV.
Notice:
While connecting the HDMI,please aim at carefully,do not insert overexertedly,
for
fear the pin might be broken.
6.Check and make sure that all AV cables are connected with the corresponding
ports
correctly.
7
8.Connect the other end of the AC power cable with the AC power port on the TV.
connect the TV power input port with the AC power out of the above range.
Please hold the insulated part of the plug when you are unplugging the power
cable, do
not touch directly the metallic part of the cable.
7.Connect the AC power cable with 100V-240V~ power supply.
Caution:The range of power input for the LCD TV is 100-240V~ 50/60Hz, do
not
Summary of Contents for NT-229W-P
Page 44: ......
