11
Eng
l
ish
M
ENU INFORMATION
2.3 Antenna Setup
Part A: Fixed
Suppose that you have selected Fixed Antenna in the Antenna Connection win-
dow .
1 . Satellite : All selected satellites in the satellite list are displayed in this item .
Press
keys to select the satellite in circle . Or press OK key to pop up the
drop-down list , then select the desired satellite in the list and press OK key to
confirm .
2 . LNB Freq , Transponder ,
DiSEqC 1 . 0 , DiSEqC 1 . 1 :
The same operation as the
above .
3 . 2 2 K , 0 / 1 2 V, Toneburst
, LNB Power : You can press
keys to select in circle.
Part B: Moter
Suppose that you have selected Moter Antenna in the Antenna Connection win-
dow.
1. LNB Type: Select the proper LNB type.
2. Motor Type: Select between DiSEqC1.2 and USALS. If you select DiSEqC1.2, the
following Local Longitude and Local Latitude items will turn grey.
3. Delete All: Press OK key to
pop up the dialogue "Are you
sure to clear set satellite posi-
tion of this tuner?". Press OK
key at the Yes button to clear
all the memories about the po-
sition of the satellites that has
4 . Motor Setting : Press OK
key to the Motor Setting win-
dow .
Satellite : Press
keys
to select the satellite in circle .
Or press OK key to pop up the
drop down list , then select
the desired satellite in the list
and press OK key to confirm
Transponder: The same operation as the above.
Position No., & Save: The range is from 0 to 63. "0" delegates the original position.
You can select the proper value when you has rotated the antenna.
Go to X: Press OK key to pop up the drop-down list, select the proper position (re-
ference or from 1to 63) to realize the selected position.
West <Save> East: Press key to turn west, while press key to turn east.
Press OK key to pop up the dialogue "Are you sure to change this satellite's posi-
tion?". Press OK key at the Yes button to save the current position, or press OK
key at the No button to cancel the operation.
Recalculation: Press OK key to pop up the dialogue "Are you sure to change this
satellite's position?". Press OK key at the Yes button to recalculation.
5. Limit Setup: Press OK key to
pop up the Limit Setup window.
Limit Setup: Press
keys to switch among Disable
Limit, East Limit and West
Limit.
Limit Setup: Move cursor to
the Limit Setup button. You
can press key to turn west , or press key to turn east.
