18
English
MAIN MENU
4.4 S/W Upgrade by OTA
1. Frequency: Use numeric keys to input the proper value.
2. Bandwidth: Select among 6, 7, 8MHz.
3. Down load PID: Use numeric keys to input the proper value.
4. Start: Press OK key to start upgrading.
If no correct searching information, system will inform "Collecting
information". You can press Exit button to return to the previous
window.
System will start upgrading after collecting information successfully. Press OK key at the Download
button and press OK key at the Burnflash button to start burning. After booting, press OK key at the Re-
boot button to reboot.
4.5 Upgrade by USB
1.Upgrade File: Show the Upgrade File.
2.Upgrade Mode: Select between AllCode, radioback and maincode . When users switch the upgrade
mode, ¡Upgrade File¡ will show the corresponding file according to the table below:
Select the upgrade mode and upgrade file, then you can start upgrade by USB.
3.Press OK key on start button to start receiving the data from USB device.
When the USB device is not connected, this item is grey, you can not edit it now.
Upgrade Mode
File feature
All code :
File named as "*.abs"
Main Code:
File named as ¡*.bin¡
Radio back:
File named as "*.m2v", the pic-
ture will be used as both radio
back and menu back
Default db:
File named as "*.bin"
