background image

2

Observe all safety precautions at all time:

Warning and Danger Symbols are used to advise the operator

 

               

               

               

   

Warnings

• 

Do not spray in heavy winds 

• 

Keep children and pets away while spraying

• 

Mix chemicals in properly marked separate containers before pouring the premixed chemicals into the          

 

sprayer, whenever possible

• 

Avoid direct personal contact with chemicals

• 

Review manual before operating your Spray Applicator

• 

Do not modify the sprayer in any way, use only manufacturers repair parts and accessories

• 

Be sure all parts are in good working order before spraying. Check sprayer daily

• 

Do not eat, drink or smoke while operating your spray applicator

• 

Fill in well ventilated areas

• 

Be sure the sprayer is properly stored when transporting

• 

Do not use flammables, caustic or corrosive materials in the sprayer

• 

Adjust sprayer shoulder harness for proper fit before using

End of day

• 

Empty sprayer contents into properly marked containers, rinse sprayer using clean water.

• 

Keep sprayer clean at all times

• 

Wash thoroughly using soap and water, wash all clothing before reuse  

Read all chemical labels prior to use. Wear the appropriate safety equipment  

Danger 

• 

Do not spray any wires, cables or power areas. The sprayer is not grounded and a risk of shock    

             could occur.

  

Summary of Contents for BOSS PRO-128















Reviews: