NOYAFA NF-868, Instruction Manual

Page: 18 / 24

-15-
Scanning
...
c. Line finding test:
After powering on the main tester and entering main test menu, press “UP”,
“DOWN” key to move
cursor to “Line finding” item, and then press
“ENTER” key to find the line. The following interface will be shown:
“ ”
Connect the cable to be found with the corresponding RJ45(S) port, RJ11,
USB and BNC interface of the emitter. Take network line finding as an example:
connect the network cable to be found with S port of the emitter, move
cursor to “line finding” item, and press “ENTER” key to perform line finding
test as shown in the figure below:
“ ”
Your wiring expert