Novy 810/16 Operating And Installation Instructions Download Page 4

Deactivate the recirculation:
•  The motor must be switched off.
•  Simultaneously press the + and the – keys on the 

hood for 5 seconds until the third green LED flashes 
3 times.

•  The run-out time has been set to 10 minutes (instead 

of 30 minutes). The cleaning indicator for recircula-
tion is off.

Cleaning indication

 Indication: red indicator lamp lights up

The red indicator lamp will light up after 200 working 
hours (time to regenerate the Monoblock recirculation 
filter). Refer to the manual of your recirculation kit for 
removing and putting back the monoblock filter.

Regenerate the Monoblock recirculation filter
•  The Monoblock can be regenerated up to 12 times. 

This is done in the oven.

•  Place the filter in the oven for 1 hour at 120°C. Pro-

vide sufficient fresh air in the room where the oven 
has been placed, as smells can be released. Smells 
can be released when baking certain kinds of fish. 
In this case it is best to immediately regenerate the 
filter in the oven.

Reset the Monoblock recirculation filter

 The cooker hood (motor) must be running

Simultaneously press + and – for 5 sec. until the red 
indicator lamp flashes 3 times for confirmation. If the 
programming is not carried out, the programming is 
automatically set after the chimney hood has been 
switched on 10 times.

After a reset, the cleaning indication will be set to 200 
hours.

Place the Monoblock recirculation filter
Refer to the manual of your recirculation kit for remov-
ing and putting back the monoblock filter.

4.3 Maintenance of the hood

Please allow the lights to cool down sufficiently before
cleaning the hood. Use a soft, wet cloth and a mild
detergent to clean the hood. 

 Never use aggressive, abrasive detergents or 

sponges. Bleach will damage stainless steel.

The stainless steel surfaces can be treated with Novy
Inoxcleaner (906.060) after cleaning.

4.4 Led lighting

Replacing the led lighting
First, remove the power supply from the hood and allow
the lighting to cool down sufficiently.

1. Carefully press the spotlight holder; next, remove the 
spotlight holder by means of a tilting movement.

4 Maintenance

4.1 Grease filter

Maintenance of the grease filter
The hood contains one metal filter which should be 
cleaned twice a month.

Grease filter indication

 Indication: 4 flashing indicator lamps

After 20 cooking hours, the 4 indicator lamps will start 
to blink during 5 minutes, this indicates that the grease 
filter has to be cleaned.

Access to the filter
Take hold of the right and left side of the plate (A) and 
pull down simultaneously. Remove the filter (B) by tak-
ing hold of its hook and pulling down.

Cleaning the filter
•  in the dishwasher
•  manually: in a hot solution of water and a liquid de-

tergent. Rince and allow to dry completely

 The previous instructions need to be followed. If 

not an increased fire hazard may occur.

Reset grease filter indication
When replacing the cleaned filter, you have to reset the 
hood by pushing the – button during 5 seconds. If you 
don’t reset, the indicator lamps will continu blinking.
We advise you to clean your filter twice a month for an 
optimal operation.

4.2 Recirculation (option)

Programme recirculation
When choosing for recirculation, always set the recircu-
lation program on the hood. Execute this programming 
as follows:
•  Do the programming with the motor switched off.
•  Simultaneously press the + and the – keys for 5 sec-

onds until the red indicator lamp flashes 5 times.

The following functions have now been enabled:
•  The run-out time has been set to 30 minutes (instead 

of the default 10 minutes). Make use of the 30 min-
utes run-out time.

•  The cleaning indicator for the Monoblock recircula-

tion filter has been set to 200 operating hours.

EN 19

Summary of Contents for 810/16









Reviews: