NVR
-
6408
-
H1/F User
’
s manual (Short) version 1.2
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
16
IV. Record Settings :
You can set one of the modes:
•
MANUAL RECORD SETTINGS
-
You can set the recording time from the moment you select
the manual recording from 1 minute to 1 hour or manually off recording.
•
AUTO
-
set all the cameras on one of the following modes :
-
MOTION RECORD
-
starts recording after receiving motion detection information from the camera.
-
SENSOR RECORD
-
starts recording after alarm generated on alarm input
-
MOTION SENSOR RECORD
-
starts recording after motion detecion alarm and after
alarm from alarm inputs
-
ALWAYS(24x) RECORD +MOTION RECORD
-
constant recording and recoring after receiving
motion detection information from the camera.
-
ALWAYS(24x) SENSOR RECORD
-
constant recording and recording alarm generated
on alarm input
-
ALWAYS(24x) RECORD + MOTION RECORD + SENSOR RECORD
-
constant recording and
recording alarm generated on alarm input and after receiving motion detection information from the
camera.
Double
-
clicking on the selected mode, set the parameter editing of the recorded stream for the selected
mode. This enables eg. Recording stream of lower quality for continuous recording and higher quality
when motion is detected.
NVR OPERATING