NVR-5720, NVR-
5736 User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
8
STARTING THE DEVICE
2.
STARTING THE DEVICE
2.1 Electrical connection and other rear panel elements.
NVR-5720 back panel
NVR-5736 back panel
1.
POWER CONNECTOR:
Power supply connector.
2.
POWER SW:
NVR power switch, plug the power cord and turn this switch on.
3.
E-SATA:
ESATA connector for external HDDs.
4.
ALARM & RS485:
Alarm input and output interface*.
5.
LAN:
RJ-45 connector port for connecting to the local network and internet
(for NVR-5720 also IP camera network).
6.
USB:
2 x USB 2.0 ports for external Flash memory, mouse connection and
other USB compatible devices.
7.
VGA:
Main monitor connectors, use D-SUB VGA cable to connect monitor.
8.
1080P (HDMI):
Main monitor connectors, use HDMI cable to connect monitor.
9.
VOUT:
Main monitor connector, BNC video output.
10. AOUT:
Port for connecting local speaker with pre-amplifier.
11. AIN/SPEAK:
Audio mono inputs for connecting microphones*.
12. IPC:
RJ-45 connector port for connecting IP camera network
* RS485 and audio input will be available in the future.
Note: For NVR-5720 back panels bottom USB port is shared with USB port at front panel (it is the
same port), so you cannot use both ports at the same time.
2
3
6
1
12
4
7
5
9
10
8
11
5
4
7
6
9
10
8
3
11
2
1