NVR-5316, NVR-5509, NVR-
5520 User’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
9
STARTING THE DEVICE
2.
STARTING THE DEVICE
2.1 Electrical connection and other rear panel elements.
NVR-5316 back panel
NVR-5509, NVR-5520 back panel
1.
POWER SW:
NVR power switch, plug the power cord and turn this switch on.
2.
DC 12V:
Power supply connector for 12V adaptor.
3.
ALARM & RS485:
Alarm input and output interface*.
4.
LAN:
RJ-45 connector port for connecting to the local network and internet.
5.
USB:
2 x USB 2.0 ports for external Flash memory, mouse connection and other
USB compatible devices.
6.
VGA:
Main monitor connectors, use the D-SUB VGA cable to connect monitor.
7.
1080P (HDMI):
Main monitor connectors, use the HDMI cable to connect monitor.
8.
VOUT:
Main monitor connector, BNC video output.
9.
AIN/SPEAK:
Audio mono inputs for connecting microphones*.
10. AOUT:
Port for connecting local speaker with pre-amplifier.
* RS485 and audio input will be available in the future.
Note:
Back panels bottom USB port is shared with USB port at front panel (it is the same port), so you
cannot use both ports at the same time.
2
5
4
7
6
8
1
9
10
3
2
5
4
7
6
8
1
9
10