CCTV – NVQ-4C , color quad processor, user’s manual v.1.0
© Copyright 2003, Novus Security Sp. z o.o. All rights reserved 3
Video Input
Connect 4 cameras to video input ports
Video Output
1 Switch: Connect this output port to the video input of monitor or TV
2 Quad: Connect this output port to the video input of VCR
Power Jack
Connect to DC12V, 500mA power supply
OPERATION
Power On
After finishing the back panel connection, please plug in DC 12V adaptor for power on, then QUAD
light on.
Front Panel Operation
ENTER
ESC
Figure 2 - Front panel keypads
Full Screen
Press any key of FULL SCREEN keys as
, the FULL SCREEN LED light on, and the monitor
screen will display whole screen of the corresponding picture.
Quad
Press
key, the QUAD LED light on, and the quad pictures will be displayed as following camera 1,
2, 3 and 4.
1
2
3
4
Figure 3 - Camera location of screen in quad mode
Switch
1.
Press
key and the screen will enter auto-switching mode. The Switch mode is switched from
QUAD screen to full screen, and dwell time is 3 seconds.
2.
It will skip the blank channel automatically and only show you the active channels.
