NVIP-8DN3512H/IR-1P - User’s manual (short form) ver 1.0.
All rights reserved © AAT Holding S.A.
19
RESTORING FACTORY DEFAULTS
6.3. Restoring factory defaults by hardware means
In order to restore factory defaults for the camera please follow the instructions:
Remove front cover to get access to internal connectors
Press the
RESET
button and hold on for 10 seconds
Release button
Close front cover off the camera (remember to tighten cover, so that the arrow points to the lock)
Log on after approx. 30 seconds using default IP address (http://192.168.1.200) and default user
name (root) and password (pass)
RESET button
