NVIP-6DN5022H/IRH-
1P User’s manual (short form) ver.1.0
All rights reserved © AAT Holding S.A.
10
3.2 Camera installation
Put mounting drawing paper to the wall or ceiling and mark drill holes.
Drill holes using markings.
Drill additional hole for video and power cables.
Using mounting screws from the package, attach the mounting plate of camera to the ceiling/
wall. Align the mounting plate with the TOP mark facing you
.
Make sure the hinge screw is attached to the back of the camera.
Put video and power cables through a previously drilled hole in the wall/ceiling.
Align the TOP mark on the camera base with the TOP mark on the mounting plate, rotate the
camera approximately 10° clockwise, and then rotate the camera counterclockwise to slide the
hinge screw into the notch on the mounting plate.
INSTALLATION
TOP
Mounting screw
holes
Mounting
plate
Hinge screw
TOP mark on
camera base
TOP mark on
mounting plate
Mounting plate
notch
