NVIP-5DN3512H/IR-1P - User’s manual (short form) ver 1.0
All rights reserved
© AAT Holding S.A.
9
2.2.
Cameras mounting and focus adjustments
To mount a camera please follow the instructions below:
1. Drill the screw holes and the cable hole on the wall according to the drill template.
2. Route the cables to the cable hole and connect the cables.
3. Using included screws mounting base on smooth surface providing declared degree of IP protection.
4. Using allen key loosen screws 1, 2 and 3. Then adjust camera position and tight lock screws.
5.
Remover sunshield and front housing and adjust zoom and focus.
6.Optionally insert SD card.
7.
Mount front housing and sunshield.
WARNING!
Please note that the wall or ceiling must have enough strength to support the IP Camera.
START-UP AND INITIAL CAMERA CONFIGURATION
