NVIP
-
4V
-
8002M User
’
s manual (short) ver.1.1
All rights reserved © AAT Holding S.A.
21
6. RESTORING FACTORY DEFAULTS
NOVUS IP cameras allow to restore defaults via:
•
software (web browser level) resetting the camera settings
•
hardware (using reset) restores factory defaults.
6.1. Restoring software factory defaults
Factory software default restores default settings of the IP camera except network settings. The camera
re
-
starts then, taking about one minute to complete. Option to restore the factory default is described in
Maintenance
tab.
6.2. Restoring hardware factory defaults in IP cameras
In order to restore factory defaults for the camera please follow the instructions:
•
Unscrew two screws holding camera cover dome using allen key and remove camera cover.
•
Press the
RESET
button and hold on for 5 seconds
•
Release button
•
Mount camera cover dome and screw to camera base.
•
Log on after approx. 2 minutes using default IP address (http://192.168.1.200) and default user
name (root) and password (pass)
RESTORING FACTORY DEFAULTS
RESET
