NVIP
-
4SD
-
6540/25/F Quick start guide version 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
9
START
-
UP AND INITIAL CONFIGURATION
2.START
-
UP AND INITIAL CONFIGURATION
2.2. Connecting ethernet cable
To maintain tightness of ethernet cable connection, please follow instruction below:
1. Unscrew the nut (b) from the connector cover (a), put the sealing ring on the socket (c)
2. Route the network cable through parts (a) and (b). Insert the RJ
-
45 plug into the socket (c)
3. Screw the connector cover (a) onto the socket (c). Press the cable seal (d) into the upper part of the
connector cover (a) as far as it will go
-
the seal has a cut enabling it to be put on the cable.
4. Tighten the nut (b) as far as it will go.
Warning!
The 12VDC power connector, the audio and alarm I/O connectors are not hermetic. The user
should ensure the tightness of these sockets on his own.
b
a
b
a
c
d
1
2
2.1.
Description of connectors
1. 100 Mb/s Ethernet port (RJ
-
45
connector)
2. Power supply 12VDC
