NVIP-4DN3513V/IR-1P - User’s manual (short form) ver 1.3.
All rights reserved
© AAT Holding S.A.
9
2.3. Connecting ethernet cable
To maintain tightness of ethernet cable connection, please follow instruction below:
1. Loosen the nut (a) from the main element (b).
2. Run power cable (without RJ-45 connector) though both elements. Then crimp the cable with RJ-45
connector.
3. Connect the cable to the hermetic connector (c), screw main cover (b), then screw the nut (a).
WARNING!
Other camera connectors are not hermetic. User should seal connectors by himself.
The declared degree of protection of the camera relates to its housing and does not take into account the
possibility of moisture infiltration into the interior of the camera by connecting cables. Connection
cables protection through i.e. sealing up is the responsibility of the camera installer. The manufacturer
is not liable for any damages to the camera caused as a result of failing in performing that activity by
installer, which also means that camera damaged in that way is not subject to warranty repairs
START-UP AND INITIAL IP CAMERA CONFIGURATION
a
b
a
b
c
