NVIP-3000 series IP PTZ camera - user manual ver.1.0.
All rights reserved © AAT Holding sp. z o.o.
28
All rights reserved © AAT Holding S.A
28
4.4 Alarm
4.4.1 Motion Detection
Alarm Config
To turn alarm on user need to select
ENABLE
ALARM
option. After that he define time of alarm
(from 5 seconds to 2 minutes). He can also use
TRIGGER E-MAIL
option to send alarm pictures
on specific address e-mail, (configuration of e-
mail address look page 34). In same way user can
configure camera to send alarm pictures on
FTP
server (configuration of
FTP
server look page
35).
Area and Sensibility
For proper motion detection user need to define zone for alarm. Use the slider to choose sensitivity of
camera depends of needs. To add areas user need to click
DRAW
button and then select area on the
preview. There is also a possibility to select
SELECT ALL
button or
CLEAR ALL
. Last option is
INVERT
button which switch selected zones with non selected areas.
WWW INTERFACE - WORKING WITH IP CAMERA
