NVIP
-
2VE
-
6601
-
II
Quick start guide
version 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10
2.3. Camera mounting
To mount a camera please follow the instructions below:
•
Unscrew the counter screw (
4
).
•
Remove the camera cover (
3
), remove the camera from the base (
5
).
•
Put the bracket to the wall in a desired mounting place (with cable hole). Take the drill pattern
and mark future drilling holes for screws and wires.
•
Drill holes for screws, wires and base.
•
Mount the camera base (
5
) using the supplied plugs and screws.
•
If necessary, unscrew the camera service panel (
1
), mount microSD card in the socket (
2
) and
screw the camera service panel (
1
).
•
Connect the camera wires, put camera on the base (
5
), attach the cover (
3
) and pre
-
tighten the
counter screw (
4
).
•
Adjust camera position.
•
Tighten to the stop counter screw (
4
).
CAUTION!
Please note that the wall or ceiling must have enough strength to carry the IP Camera.
START
-
UP AND INITIAL CAMERA CONFIGURATION
5
3
4
2
1
