NVIP
-
2VE
-
6232
Quick start guide
version 1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
18
FACTORY SETTINGS RESTORING
6. FACTORY SETTINGS RESTORING
NOVUS NVIP
-
2VE
-
6232 cameras allow to restore defaults via:
•
software (via web browser )
•
software (via NMS IPTool)
•
hardware (using RESET button
)
)
6.1. Software factory settings restoring via web browser
Restoring factory settings of the IP camera restores all default settings. Restoring factory settings via
web browser allows you to optionally keep some settings, such as network settings. To restore default
settings go to:
“
Maintenance
-
> Backup and Restore
”
tab. This process takes about two minutes.
6.2. Software factory settings restoring via NMS IPTool
NMS IPTool (version 3.5 or later) allows to restore factory settings. To restore settings via
NMS
IPTool, find the camera in the list of available devices and then, on the right side of the row
click . Then within 30 seconds disconnect power of the camera. After reconnecting the camera, all
settings are factory default.