NVIP-2V-6501/F
Quick start guide
version 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10
2.3. Camera mounting
To mount a camera please follow the instructions below:
•
Unscrew the camera cover (
4
) by turning counter
-
clockwise.
•
Remove the camera housing (
3
).
•
Put the bracket to the wall in a desired mounting place (with cable hole). Take the drill pattern
and mark future drilling holes for screws and wires.
•
Drill holes in accordance with previously done markings and base hole placement.
•
Mount the camera base (
1
) using the supplied plugs and screws.
•
If necessary, mount microSD card in the socket (
2
), than connect the camera wires
•
Adjust camera position, if necessary.
•
Screw the camera housing (
3
) back on camera.
•
Screw the camera cover (
4
) by turning it clockwise.
CAUTION!
Please note that the wall or ceiling must have enough strength to carry the IP Camera.
START
-
UP AND INITIAL CAMERA CONFIGURATION
4
3
2
1
