NVIP
-
2Q
-
6101/PIR/W
Quick start guide
ver. 1.1
All rights reserved © AAT Holding S.A.
11
START
-
UP AND INITIAL CONFIGURATION
2.4. Connecting the LAN network cable
To connect to the camera via a wired LAN, insert the LAN cable plug into the LAN socket so that the
plug latch clicks into the socket. Connect the other end of the cable to your switch / router.
2.5. Camera mounting
The camera design allows flexible selection of the place of attachment / installation. The camera can
work when placed on any flat surface or be hung using mounting holes in the foot.
To mount the camera in a hanging position, we recommend you follow the following guidelines:
•
Place the template where you want to install the camera. Then drill the holes according to the
template.
•
Insert the dowels into the holes and tighten the screws. The screws should protrude a few
millimeters above the wall surface.
•
Route and connect the cables to the camera.
•
Hang the camera by the mounting base on the screws and make sure it is securely fastened.
Then adjust the camera position.
Caution:
The camera is designed for indoor use in living quarters. Using it outdoors, or in rooms with
high humidity such as swimming pools, bathrooms, laundries, etc. may cause the camera to
malfunction or damage.
