NVIP
-
2H
-
4201 Quick start guide version 1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
7
FOREWORD INFORMATION
1.3. Camera dimensions
Dimensions in the drawing are given in millimeters
1.4. Package contents
After you open the package make sure that the following elements are inside:
•
IP camera
•
Accessories bag
•
Short version of user
’
s manual
If any of this elements has been damaged during transport, pack all the elements back into the original
box and contact your supplier for further assistance.
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches
the temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short
-
circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
IR LED
LED Number
18
Range
30 m
Angle
60°
INTERFACES
Network Interface
1 x Ethernet
-
RJ
-
45 interface, 10/100 Mbit/s
INSTALLATION PARAMETERS
Dimensions (mm)
with bracket: 71 (
Ф)
x 138 (L)
Weight
0.32 kg
Degree of Protection
IP 66 (details on page 9 of this user
’
s manual)
Enclosure
aluminium, white, fully cable managed wall mount bracket in
-
set
included
Power Supply
PoE, 12 VDC
Power Consumption
1.5 W, 4 W (IR on)
Operating Temperature
-
30°C ~ 55°C
