NVIP-2DN3031AH/IR-1P - User’s manual (short form) ver 1.0.
All rights reserved © AAT Holding S.A.
9
2.2 Description of connectors and control tools
1. BNC output
2. Audio input (MIC)
3. Power supply 12VDC
4. 100 Mb/s Ethernet port (RJ-45 hermetic connector)
2.3. Connecting ethernet cable
To maintain tightness of ethernet cable connection, please follow instruction below:
1. Loosen the nut (a) from the main element (b).
2. Run power cable (without RJ-45 connector) though both elements. Then crimp the cable with RJ-45
connector.
3. Connect the cable to the hermetic connector (c), screw main cover (b), then screw the nut (a).
WARNING!
12VDC power connector is not her metic. User should seal power connector by
himself.
START-UP AND INITIAL CAMERA CONFIGURATION
a
b
a
b
c
