NVIP-1DN5001H/IRH-
1P User’s manual ver.1.0
(short form)
All rights reserved © AAT Holding sp. z o.o.
20
5. ELECTRIC CONNECTORS AND ACCESORIES
5.1. Connecting power supply to the camera.
The camera can be supplied by using RJ45 network socket or by power connector. To run NOVUS IP
camera you can connect ethernet cable between camera and network switch with PoE support (IEEE
802.3af). You can also use a power injector compatible with (IEEE 802.3af) standard. Use power
supplay with parameters compatible with camera specification to power camera via power in jack.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
Caution : Make sure to follow the correct polarity if connecting the camera to DC power. The
central pin is positive polarity
.
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
6. RESTORING FACTORY DEFAULTS
NOVUS IP cameras allow to restore defaults via:
Software (web browser level) resetting the camera settings
Hardware (using reset) restores factory defaults.
6.1. Restoring software factory defaults
Restoring factory software default can restore default settings of the IP camera , optionally network
settings can be saved.
Logon to the camera and choose
MAINTENANCE> DEFAULT
SETTINGS
Check the
Save the IP setting
box to preserve IP setting after restore.
Click
Restore
button. The camera re-starts then, taking about two minutes to complete.
Log on approx. using default user name (root) and password (pass)
ELECTRIC CONNECTORS AND ACCESORIES
