NVIP-1DN3020V/IR-1P, NVIP-1DN3040V/IR-1P, NVIP-2DN3020V/IR-1P,
NVIP-2DN3040V/IR-1P - User’s manual (short form) ver 1.0.
All rights reserved © AAT Holding sp. z o.o.
18
ELECTRIC CONNECTORS AND ACCESORIES
Alarm output
Camera alarm output is an relay output type.
•
Alarm output electric connections
5.4 SD card installation
Function available only for NVIP-1DN3040V/IR-1P, NVIP-2DN3040V/IR-1P.
Camera supports microSD/SDHC cards up to a maximum size of 64GB. In order to install the card
properly, please follow the instructions below:
•
Turn the camera off
•
Unscrew screws holding camera dome cover using allen key and remove camera cover.
•
Mount SD card in the socket located at the camera’s base, according to the picture:
•
Mount camera cover dome and screw to camera base.
•
Turn the camera on
•
Check the SD card by checking its capacity in the “System Config” -> “SD Card”
tab.
Alarm
Output (-)
Alarm COM
Alarm
Output (+)
Alarm NO
Indicator
power
supply
Indicator
IP Camera
microSD card slot
