NVC-GDN3810H/IR, NVC-GDN3810H/IRH ver. 1.0 - User’s manual
All rights reserved © AAT Holding sp. z o.o.
9
5. SETTINGS
Camera features the OSD menu. During camera standard operation status information may be
displayed on the screen.
As it has been mentioned before, a joystick located at the camera’s bottom control panel, available
after unscrewing the protective cap, is dedicated for navigation and changing the settings. Available
joystick movements and commands associated with these, are listed below:
In order to enter the menu please press the joystick, executing the
SET
command.
For choosing the
submenus please move the joystick
UP, DOWN
. Enter particular sub-menus by pressing the
SET
button
.
To change the parameters use the
LEFT
and
RIGHT
commands.
In order to leave the menu select
EXIT
and press
SET
. Depending on the value of the parameter
located to the right of the
EXIT
text, different actions are taken when exiting:
selecting
SAVE
and pressing
SET
means that the changes that have been made are saved and
are kept even when the camera restarts.
selecting
NOT SAVE
and pressing
SET
means that the changes that have been made are
temporary and will be cancelled once the camera restarts.
selecting
RESET
and pressing
SET
results in restoring factory defaults.
To exit submenu please select
RETURN
position, and when
Press SET to Return
message is
displayed at the bottom part of the screen press
SET
to leave the menu .
After one minute of inactivity in the menu camera will automatically exit from the programming
mode.
5.1 Main menu
In order to enter the menu press the
SET
. The following main menu is displayed on the screen:
SETTINGS
Device should be supplied only from a power sources whose parameters are
ENTER
LEFT
DOWN
UP
SET
RIGHT
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.SSDR
OFF
5.BACKLIGHT
HLC
6.DNR3
ON
7.DAY/NIGHT
COLOR
8.SPECIAL
9.EXIT
SAVE
