Wszelkie prawa zastrzeżone © AAT Holding sp. z o.o.
7
NVC-201D -
User’s manual ver. 1.0
4. INSTALLATION
•
Put mounting drawing paper to the wall or ceiling and mark drill holes.
•
Drill holes for screws and cables.
•
Gently unscrew the camera cover counter-clockwise
•
Remove the masking shield from the camera.
•
Press the tab, which is located inside the middle-housing, and unscrew the base of the
camera.
•
Using mounting screws from the package attach the base of camera to the ceiling/wall.
•
Put middle-housing on the base of the camera and screw it clockwise.
•
Manually point the camera in a desired direction to obtain a desired scene view.
•
Adjust zoom and focus if needed.
•
Put the masking shield onto camera. Please ensure that masking shield does not block the
field of view of the camera.
•
Put dome cover on the camera and screw it clockwise.
4.1 Power supply connection
Warning: Device should be supplied only from a power sources whose parameters are in
accordance with those specified by the producer in the camera technical datasheet.
Therefore, it is forbidden to supply the camera from power sources with their
parameters unknown, unstable or not meeting the producer’s requirements.
See the power supply terminal connections below.
INSTALLATION
video
12V DC +/- 10%
video
GND
+
- (GND)
Summary of Contents for NVC-201D
Page 1: ...NVC 201D user s manual...
