NVAHD-2DN5104H/IRH-2 - ver. 1.0 - User’s manual
All rights reserved © AAT Holding S.A.
16
SETTINGS
BLACK DPC
- allows to correct (mask) dead pixels. Selecting ON and pressing ENTER button
opens a submenu which define the size and location of the zone in which the correction is made
(position POS/SIZE), then define the compensation level (position LEVEL). Then select
START
position and press
ENTER
button and wait for the end of the operation. In the
DPC VIEW
check
the correction effect and, if needed repeat the operation with different settings.
RS485
- option disabled
5.1.8
ADJUST
submenu
It allows to perform additional image adjustment. After pressing
ENTER
, the following submenu is
dispalyed:
SHARPNESS
- allows to disable (
OFF
) and enable (
AUTO
) sharpness correction function. After
selecting
AUTO
and pressing
ENTER
, next submenu is displayed, where it is possible to set the
degree of correction and gain ranges for compensation
MONITOR
- corrects the image parameters depending on chosen monitor (LCD monitor or CRT
monitor). After pressing
ENTER
, the submenu is displayed where fine adjustments can be made.
LSC
- enables and disables the function of increasing the brightness of the image edge
VIDEO OUT
- chooses a system in which the camera works (PAL or NTSC)
INFORMATION:
For camera mode analog 960H in the
ADJUST
menu there are two additional items:
MONITOR OUT
- switches the aspect ratio between 4:3 and 16:9
COMET
- option disabled
