NVAHD
-
2DN5102MV/IR
-
1
-
user
’
s manual ver. 1.2
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
8
INSTALLATION
4. INSTALLATION
Please familiarize yourself with the device, its parameters and methods of mounting, before
mounting .
Put mounting drawing paper to the wall or ceiling and mark drill holes.
Drill holes using markings.
Drill additional hole for cables.
Using mounting screws from the package, attach the base of camera to the ceiling/wall (holding
the camera with hand if needed).
Put video and power cables through a base of camera and a previously drilled hole in the wall/
ceiling.
Put the dome cover on the camera (holding the camera with hand if needed).
Put the stopping ring on the dome cover and gently screw it to the base .
Manually point the camera in a desired direction to obtain a desired scene view.
Screw the stopping ring firmly (holding the camera with hand if needed).
Adjust zoom and focus if needed using adjustment screws. It is recommended to check focus
settings in infrared illumination and make correction in color mode to have proper focus in both
modes.
Make the appropriate camera settings via the OSD menu
4.1. Power supply connection
NOTE: Device should be supplied only from a power sources whose parameters are in
accordance with those specified by producer in the camera
’
s technical datasheet. Therefore, it is
forbidden to supply the camera from power sources whose parameters are unknown, unstable
or not meeting the producer
’
s requirements.
CAUTION!!!
The declared degree of protection of the camera relates to its housing and does not take into
account the possibility of moisture infiltration into the interior of the camera by connecting
cables. Connection cables protection through i.e. sealing up is the responsibility of the camera
installer. The manufacturer is not liable for any damages to the camera caused as a result of
failing in performing that activity by installer, which also means that camera damaged in that
way is not subject to warranty repairs
Video
(GND)
+
-
(GND)
Power Supply 12V DC +/
-
10%
Video
