NVAHD-2DN5101MV/IR-1
- user’s manual ver. 1.0
All rights reserved © AAT Holding S.A.
12
SETTINGS
SELECT
-
allows to select one of the four areas of HSBLC function
DISPLAY
- enables or disables previously selected zone.
BLACK MASK
- enables or disables masking area
LEVEL
- adjusts intensity function between 0-100
MODE
-
(ALL DAY/NIGHT)
determines whether the function is running all the time or only at
night (recommended).
DEFAULT
-
restores default HSBLC settings.
5.1.4
WHITE BAL
submenu
This feature allows to set appropriate color settings using following options:
ATW -
auto tracking white balance based on color temperature.
AWC→SET -
this mode enables adaptive setting of white balance. In order to obtain the
optimum state under the current illumination, direct the camera at a sheet of white paper and
press
ENTER
. When lighting parameters change (e.g. light bulbs changed to halogen lamps,
daylight to artificial light etc. ), procedure mentioned above should be repeated;
INDOOR
- this mode is designed when camera works in indoor environment
OUTDOOR
- this mode is designed when camera works in outdoor environment
MANUAL
- manual mode settings. In case of inappropriate color settings for
ATW, AWC
modes it is possible to set
RED
and
BLUE
values manually. Color values range from 0 to 100
and are represented by sliders. Any change in the color components are instantly applied to the
image.
AWB
- auto white balance adjustment.
5.1.5
D&N
submenu
Allows to adjust day/night settings. Available settings are:
AUTO, EXT, COLOR, B/W.
AUTO
-
camera switches between night (b/w) and day (color) mode automatically, depending
on current illumination conditions. Settings are available at following sub-menu:
D--N (AGC) and N--D (AGC) -
sets the illumination threshold that switches the camera from day
to night mode and from night to day mode (respectively 1~186 and 1~186)
D--N (DELAY) and N--D (DELAY)
-
sets the delay between color and b/w mode switching and
between b/w and color mode (0~60s)
