NV-DVR1004 / NV-DVR1004NET ver. 1.0 - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
24
4.3 Recording
In
RECORD SETUP
menu following settings can be adjusted:
(1)
RECORD MODE
:
This option allows to define recording mode. Multiplexer mode (
MUX
)
means that images from each channel are stored one after another. Later on
there is full screen as well quad playback mode possible. Quad mode
(QUAD) means that there are all channels recorded in the same time in
quad division. Later on there is only quad playback mode available.
Recording time is aprox. 3 times shorter than in MUX mode using the same
HDD.
(2)
NORMAL RECORD FPS:
This option is used to set recording speed for normal and schedule
recording. Speed values are expressed in fields per second rate.
Following values are available: 25, 12, 8, 6, 4, 3, 2, 1.
Recording speed applies to entire Multiplexer. Depending on
number of recording cameras the Multiplexer resources are equally
divided between each camera.
(3)
ALARM RECORD FPS:
This option is used to set recording speed during alarm mode
(input alarms and motion detection). Speed values are expressed in
fields per second rate. Following values are available: 25, 12, 8, 6,
4, 3, 2, 1. Recording speed applies to entire Multiplexer.
Depending on number of recording cameras the Multiplexer
resources are equally divided between each camera.
(4)
ALARM RECORD DWELL
:
Time defined in seconds describing the alarm duration.
This setting allows to record in alarm mode for longer
periods of time then the duration of alarm event;
DEVICE MENU
RECORD SETUP
RECORD MODE
MUX
NORMAL RECORD FPS
10P
ALARM RECORD FPS
25P
ALARM RECORD DWELL
5 SEC
RECORD QUALITY
HIGH
EXIT
