All rights reserved © AAT Holding S.A.
NV-5000EST-H4
User's manual ver. 1.0
8
2.4. Starting the HDD rack.
port of the DVR like depicted below.
To start the unit, connect provided DC 12V adapter in the power connector located at the back panel.
Connect the E-SATA cable to HDD rack and DVR, NVR etc. Turn on the power switch on back panel.
HDDs installed in HDD rack are available at HDD list in DVR, NVR. Enabling E-SATA recording may
be required.
CAUTION:
Make connection when the power is not applied.
Do not place the power cord under the carpet or rug. The power cord is usually earth-grounded.
However, even if it's not earth-grounded, never modify it on your own for earth-grounding.
Make sure that power adapter is placed near of DVR and secured from accidental disconnection.
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
STARTING THE DEVICE
POWER SWITCH
12V DC ADAPTER
POWER CONNECTOR
