NHDR
-
6016
-
H1
-
II
Quick start guide
version 1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA SP. Z O.O.
6
STARTING THE DEVICE
2.2 HDD mounting
The NHDR
-
6016
-
H1
-
II recorder allow mounting one internal disk.
NOTE!
In order to find information regarding the compatible models of HDDs and their maximum
capacities, please contact Novus distributor or check the information presented at
www.novuscctv.com. AAT SYSTEMY BEZPIECZEŃSTWA SP. Z O.O. company is not
responsible for any problems from using not recommended hard drives.
The list of compatible HDDs contains all the HDDs that can be used with a given NHDR
including HDDs designed for office use
-
so called desktop disks. However, due to the fact that
reliability of the recording process and data safety are paramount factors of any CCTV system,
we strongly advise to use HDDs designed for continuous (24/7) operation.
You need to format disks if they were used in a different device. All data saved on HDD prior to
format will be lost.
NOTE:
Before removing cover unplug the power cord from the NHDR. When NHDR is turned on before
disconnecting the power cord, shut down the recorder using the NHDR menu.
In order to mount the hard drives, after unscrewing four screws (two screws on the side of the housing)
in the places shown in the photo below, remove the recorder housing by sliding it back and then lifting
it up.
