All rights reserved © AAT Holding S.A.
NHDR-5004AHD, NHDR5008AHD, NHDR-5016AHD
User's manual (short) ver. 1.0
8
1. VIDEO IN:
Video inputs for connecting video signal sources to the DVR
.
2. AUDIO IN:
A
udio mono inputs (RCA LINE IN type) for connecting microphones.
3. AUDIO IN:
9-16 audio mono inputs (RCA LINE IN type on the additional cable in set
included) for connecting microphones
(only NHDR-5016AHD model).
4. AUDIO OUT:
Audio output for connecting speakers and amplifier (RCA connector).
5. HDMI:
Main monitor connector, use the HDMI cable to connect monitor.
6. VGA:
Main monitor connector, use the D-SUB VGA cable to connect monitor.
7. LAN:
RJ-45 connector port for connecting to the local network and internet.
8. USB:
2
x USB 2.0 ports for external Flash memory, mouse connection and other
USB compatible devices.
9. SENSOR:
Alarm inputs, which may be set either as normal open (N.O.) or normal
closed (N.C.). The ground of the alarm device needs to be connected to one of
the G connectors.
10. ALARM:
alarm output, relay 3A 250VAC / 3A 30VDC.
11. RS-485:
RS-485 bus connector for connecting PTZ cameras.
12. DC 12V:
Power supply connector for 12V adaptor.
13. POWER SW:
Power switch, plug the power cord and turn this switch on.
14. IR EXT:
External IR receiver connector.
2.2. HDD mounting
Note:
In order to obtain info on latest compatible HDDs together with their capacities,
please contact your distributor or visit www.novuscctv.com website. AAT HOLDING
company does not bear responsibility for any issues arising from usage of
unsupported SD cards/HDDs.
Note:
List of compatible HDDs contains all disks supported by a given DVR model,
including desktop HDDs. However due to the fact that image recording prefers
reliability usage of 24x7 recording HDDs is therefore advised.
Note:
If a disk was used in another device, formatting becomes necessary. Please take it into
account due to the irrecoverable data loss resulting from said process.
NHDR-5004AHD and NHDR-5008AHD recorder support 1x
3,5" SATA HDD. NHDR-5016AHD
supports up to two 3,5" SATA HDDs. Please follow the instruction to mount the HDD.
STARTING THE DEVICE
