All rights reserved © AAT Holding S.A.
Security settings recommendations for NHDR and NVR 4000 series Novus recorders
8
INITIAL CONFIGURATION
After starting HTTPS encryption, run a browser and connect to the recorderusing the prefix
„https://”
.
In the Internet Explorer browser, expand the MORE INFORMATION button and click on CONTINUE
TO THIS WEBSITE (NOT RECOMMENDED). After that, the recorder login page should open.
2. 2. 3. Devices access restrictions
According to the above recommendations, in order to provide adequate protection against unauthorized
access, it is recommended to prepare a separate LAN subnet dedicated only to the monitoring system.
In addition, remote access to devices located in a dedicated subnet (such as a recorder, cameras) should
be secured by a firewall that filters traffic at the TCP / IP level.
The additional solution is to use IP filtering. This functionality is available directly on the device. It
allows to define devices that will be able to connect to the device remotely. The rule can be set by
adding the IP address of the trusted device (L3 layer).
To configure the list, enable the filtering function in the
„Network”
menu,
„IP filtering”
submenu.
Then enable
„Alow white list”
and add IP addresses which will be able to connect to the device
remotely.
After defining the list, all changes have to be accepted by
„Apply”
button.
