NHDR-3204AHD, NHDR-3208AHD
User's manual (short) ver. 1.3
All rights reserved © AAT Holding S.A.
13
2.4. Connecting monitor
This product supports following interfaces for main monitor: HDMI, VGA.
For HDMI and VGA outputs following resolutions are supported
: 1024x768(60Hz), 1280x1024(60Hz),
1440x900(60Hz), 1280x720 (60Hz), 1920x1080 (50Hz).
Default screen resolution is 1280x1024 (60Hz).
Changing the screen resolution is available in main menu of the DVR. Change is made after the
restarting the DVR. In case of monitor does not display anything wait a moment, then previous
resolution is restored.
Note:
You can use the HDMI <> DVI converter to connect to the DVI monitor.
HDMI cable and HDMI<>DVI converter it’s not included and you have to buy it separately.
2.6. Connecting ethernet network
DVRs have a 10/100Mbit Ethernet card. It can be connected with PC, IP camera, switch. Description
how to add IP camera is given in chapter 3.8
CAUTION! It is forbidden to connect ethernet port of the DVR to the POE port of the POE
Switch. It may cause devices failure.
3.
DVR OPERATING
3.1.
Front panel description
Front panel contain LEDs informing about device state and USB port.
HDD LED.
Flickering indicates that the recording or searching / playback is in progress.
Power LED. When the LED is light on, it means DVR is working.
USB 2.0 port for external HDDs, Flash memory or USB mouse connection.
STARTING THE DEVICE
HDD
PWR
