3
should achieve a sharp image of object.
At night or in full darkness one should switch IR illuminator 4 with the
use of switch 9.
When the work is over, the batteries are to be removed from the
battery housings, the objective lens is to be covered and the monocular
is to be put into the case.
When using the monocular together with a camera it is necessary
to:
- screw up an eyeshield 12 from eyepiece 10;
- screw an adapter 13 in theeyepiece of monocular (Fig.2);
- open a diaphragm of objective lens;
- connect the camera to monocular as it is shown on figure 3;
- switch a monocular.
Rotating a ring 11 of eyepiece 10 and ring of objective lens of
monocular and camera one should achieve a sharp image of object.