NovoPress SLB 120, Repair Instructions

Page: 8 / 32

4
ASSEMBLY
1. Cylinder
1.1. Fit the thrust ring (44) and
O-ring (45) on to the
piston (3).
1.2. Insert piston (3) into
cylinder (2).
1.3. Push the return spring
(40) on to the piston rod.
1.4. Insert stripper (46) into the
table (1).
1.5. Fit cylinder (2) with built-in
parts into the table (1).
1.6. Insert and tighten
assembly bolts (32245)
diagonally, through
cylinder (2) into table (1).
1.7. Draw cylinder (2) up to
table (1) by tightening the
loose nuts (M) a little at a
time (1/4 turns).