Declaration of Conformity and Incorporation
76
NovoPort® IV
14
Declaration of Conformity and Incorporation
14.1 Declaration of Incorporation in accordance with the EC Machinery
Directive 2006/42/EC
Manufacturer's Declaration of Incorporation (Translation of the Original)
For the incorporation of partly completed machinery
in accordance with the EC Machinery Directive 2006/42/EC, Annex II, part 1, Section B
We hereby declare that the following partly completed machinery – as far as possible with respect to the
scope of supply – complies with the essential requirements of the EC Machinery Directive.
The partly completed machinery is only intended to be incorporated into a door system to thus form a
complete machine within the meaning of the EC Machinery Directive. The door system must not be put
into service until the final machinery has been declared in conformity with the provisions of the
EC Machinery Directive and the EC Declaration of Conformity according to Annex II A is available.
We furthermore declare that the relevant technical documentation for this partly completed machinery
has been compiled in accordance with Annex VII, part B, and undertake to transmit it through our
Documentation Department in response to a reasoned request by the competent national authorities.
14.2 Declaration of Conformity according to Directive 2014/53/EU
Machine type:
Garage operator
Machinery designation:
NovoPort
®
IV
Year of manufacture:
from 2018
Relevant EC/EU directives:
•
Directive 2014/30/EU on electromagnetic compatibility as of
29/03/2014
•
Directive 2011/65/EU on restrictions on the use of certain
hazardous substances in electrical and electronic equipment as of
01/07/2011
Fulfilled requirements of the
EC Machinery Directive
2006/42/EC, Annex I, part 1:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.3.1, 1.3.2,
1.3.4, 1.3.7, 1.5.1, 1.5.4, 1.5.6, 1.5.14, 1.6.1, 1.6.2, 1.6.3, 1.7.1, 1.7.3,
1.7.4
Applied harmonised
standards:
EN ISO 12100:2010; EN ISO 13849-1:2015, PL “C” Cat. 2
EN 60335-1:2012 (as applicable), EN 61000-6-3:2007 / A1:2011
EN 61000-6-2:2005 / AC:2005,
EN ISO 13850:2008; EN 60204-1:2006/AC:2010;
EN 617:2001+A1:2010; EN 618:2002+A1:2010
Other applied technical
standards and specifications:
EN 300220-1:2017-05, EN 300220-2:2017-05
EN 301489-1:2017, EN 12453:2017
EN 60335-2-95:2015-01 / A1:2015-06
Manufacturer and name of the
authorised representative of
the technical documentation:
Novoferm tormatic GmbH
Eisenhüttenweg 6
44145 Dortmund
Dortmund, 5th June 2018
Place, date
Dirk Gößling, Managing Director
The integrated radio system complies with Directive 2014/53/EU.
The full text of the Declaration of Conformity can be found at:
https://www.tormatic.de/dokumentation/